Search Results (2,539)

Stability analysis of lateral–torsional coupled vibration is obligatory for rotating machinery, such as aero-engines. However, the state-of-the-art method may lead to stability misjudgment under different coordinate systems. The cause of this misjudgment has not yet been well explored. The purpose of this paper is to clarify the error source of the stability analysis in a more comprehensive manner. A vertical Jeffcott rotor model including torsion vibration is built, and the Lagrange approach is applied to establish the motion equations. The coordinate transformation matrix is used to transfer the motion equations into the rotating coordinate system, making the coefficients of the motion equation constants. The differences in the unstable speed regions in the two coordinate systems are captured. The limitations of the Floquet theory and Hill’s determinant analysis in the stability estimation of the lateral–torsional coupled vibration are explained. It is found that, for Hill’s method, increasing the number of the harmonic truncation cannot correct the misjudgment, and the matrix truncation is the fundamental error source. The above research provides more accurate theoretical support for the analysis of the lateral–torsional coupling instability of rotors. Full article

With the development of the air traffic management system (ATM), the cyber threat for ATM is becoming more and more serious. The recognition of ATM cyber threat entities is an important task, which can help ATM security experts quickly and accurately recognize threat entities, providing data support for the later construction of knowledge graphs, and ensuring the security and stability of ATM. The entity recognition methods are mainly based on traditional machine learning in a period of time; however, the methods have problems such as low recall and low accuracy. Moreover, in recent years, the rise of deep learning technology has provided new ideas and methods for ATM cyber threat entity recognition. Alternatively, in the convolutional neural network (CNN), the convolution operation can efficiently extract the local features, while it is difficult to capture the global representation information. In Transformer, the attention mechanism can capture feature dependencies over long distances, while it usually ignores the details of local features. To solve these problems, a TextCNN-Flat-Lattice Transformer (TCFLTformer) with CNN-Transformer hybrid architecture is proposed for ATM cyber threat entity recognition, in which a relative positional embedding (RPE) is designed to encode position text content information, and a multibranch prediction head (MBPH) is utilized to enhance deep feature learning. TCFLTformer first uses CNN to carry out convolution and pooling operations on the text to extract local features and then uses a Flat-Lattice Transformer to learn temporal and relative positional characteristics of the text to obtain the final annotation results. Experimental results show that this method has achieved better results in the task of ATM cyber threat entity recognition, and it has high practical value and theoretical contribution. Besides, the proposed method expands the research field of ATM cyber threat entity recognition, and the research results can also provide references for other text classification and sequence annotation tasks. Full article

In this paper, we propose a nonlinear tracking solution for maneuvering aerial targets based on an adaptive interacting multiple model (IMM) framework and unscented Kalman filters (UKFs), termed as AIMM-UKF. The purpose is to obtain more accurate estimates, better consistency of the tracker, and more robust prediction during sensor outages. The AIMM-UKF framework provides quick switching between two UKFs by adapting the transition probabilities between modes based on a distance function. Two modes are implemented: a uniform motion model and a maneuvering model. The experimental validation is performed with Monte Carlo simulations of three scenarios with ACAS Xa tracking logic as a benchmark, which is the next generation of airborne collision avoidance systems. The two algorithms are compared using hypothesis testing of the root mean square errors. In addition, we determine the normalized estimation error squared (NEES), a new proposed noise reduction factor to compare the estimation errors against the measurement errors, and an estimated maximum error of the tracker during sensor dropouts. The experimental results illustrate the superior performance of the proposed solution with respect to the tracking accuracy, consistency, and expected maximum error. Full article

In this paper, we propose an output feedback flight tracking control scheme for helicopter attitude and altitude systems with unmeasured states under full state constraints. Firstly, a state observer is constructed based on the measured output signals, which is proven to be rigorous since all states are constrained within the desired and assigned scopes. Secondly, the flight tracking controller is built using the state estimations with the full state constraints control method. Then, the Barrier Lyapunov function method is adopted to guarantee the stability of the composite closed-loop nonlinear error systems. Meanwhile, the linear matrix inequality technology is applied to calculate the gains of the state observer. Finally, a numerical simulation example is provided to confirm the reasonableness of the full state constraint output feedback flight tracking control method. Full article

The electric solar wind sail, or E-sail, is a novel deep space propulsion concept which has not been demonstrated in space yet. While the solar wind is the authentic operational environment of the electric sail, its fundamentals can be demonstrated in the ionosphere where the E-sail can be used as a plasma brake for deorbiting. Two missions to be launched in 2023, Foresail-1p and ESTCube-2, will attempt to demonstrate Coulomb drag propulsion (an umbrella term for the E-sail and plasma brake) in low Earth orbit. This paper presents the next step of bringing the E-sail to deep space—we provide the initial modelling and trajectory analysis of demonstrating the E-sail in solar wind. The preliminary analysis assumes a six-unit cubesat being inserted in the lunar orbit where it deploys several hundred meters of the E-sail tether and charges the tether at 10–20 kV. The spacecraft will experience acceleration due to the solar wind particles being deflected by the electrostatic sheath around the charged tether. The paper includes two new concepts: the software architecture of a new mission design tool, the Electric Sail Mission Expeditor (ESME), and the initial E-sail experiment design for the lunar orbit. Our solar-wind simulation places the Electric Sail Test Cube (ESTCube) lunar cubesat with the E-sail tether in average solar wind conditions and we estimate a force of $1.51\times {10}^{-4}$ N produced by the Coulomb drag on a 2 km tether charged to 20 kV. Our trajectory analysis takes the 15 kg cubesat from the lunar back to the Earth orbit in under three years assuming a 2 km long tether and 20 kV. The results of this paper are used to set scientific requirements for the conceptional ESTCube lunar nanospacecraft mission design to be published subsequently in the Special Issue “Advances in CubeSat Sails and Tethers”. Full article

This paper investigates the use of pulsar-based navigation for deep-space CubeSats. A novel approach for dealing with the onboard computation of navigational solutions and timekeeping capabilities of a spacecraft in a deep-space cruise is shown, and the related implementation and numerical simulations are discussed. The pulsar’s signal detection, processing, and exploitation are simulated for navigation onboard a spacecraft, thus showing the feasibility of autonomous state estimation in deep space even for miniaturized satellites. Full article

This paper presents the design of an innovative wingtip device actively actuated to control the aeroelastic loads, with a focus on the gust load alleviation. It summarizes the work carried out in the Clean Sky 2 AIRGREEN2 project, where the device was developed from scratch and reached a relevant technology readiness level with the full-scale prototype manufacturing and testing, compulsory to obtain the permit to fly. This paper describes the overall design of the devices, covering the structure, the aero-servo-elasticity characteristics of the whole aircraft, the actuation system design, the scaled wind tunnel testing, and the full-scale structural qualification tests. The paper proves how the development of a new item involves several disciplines simultaneously, remarking on the importance of an integrated approach to the new generation aircraft design. Full article

A gas–solid-coupled sandwich combustion model was established for ammonium perchlorate (AP)/hydroxyl-terminated polybutadiene (HTPB) composite propellant. Numerical simulations were conducted to investigate the influence of the content of AP and the relative position of the coarse AP on the flame structure and the burning rate of the propellant. The results indicated that the overall AP mass fraction has a significant effect on the gas-phase flame temperature and burning rate, and there exists an optimal oxygen-to-fuel ratio that maximizes the burning rate. As the mass fraction of fine AP increased, the premixed flame above the binder matrix gradually took over the dominance of the diffusion flame, and the intensity of the diffusion flame near the interface of coarse AP and binder matrix also increased, resulting in a significant increase in the burning rate. As the mass fraction of fine AP increases from 0% to 70.0%, the average surface temperature increases from 937 K to 1026 K, and the burning rate rises from 0.9 cm/s to 2.7 cm/s. The location of the coarse AP causes the flame tilts to the side with less binder matrix, but it had little effect on the burn rate of the propellant. Full article

The present study theoretically investigated the linear instability of a liquid film sheared by gas flow under acoustic oscillations. In this work, the velocity oscillations of the gas are used to approximately characterize the acoustic oscillations, and the ratio of the conduction heat flux to the evaporation heat flux is used to characterize the heat and mass transfer. Considering the much stronger impact of the heat convection than the heat conduction in practical cases, a correction factor is introduced to satisfy the heat flux ratio within a reasonable range. Because of the oscillatory velocity of gas, several unstable regions, involving the KHI region and the parametric instability (PI) region, appear. The impact of the velocity oscillations on the KHI is related to the forcing frequency. Increasing the oscillatory velocity amplitude promotes the KHI when the forcing frequency is large, while the KHI is restrained with the increase in the oscillatory velocity amplitude when the forcing frequency is small. Since the viscous dissipation is enhanced when the forcing oscillations frequency increases, the PI is suppressed. In addition, when the surface tension decreases, the interfacial instability is also promoted. Increasing the gas–liquid density ratio can destabilize the surface. However, the impact of the heat and mass transfer on the interfacial instability is neglectable as the gas–liquid density ratio is large. Furthermore, the heat and mass transfer have a promoting impact on the PI and KHI, while their destabilizing effect on the indentation between unstable regions is greater. It is significant to note that the location of the maximum growth rate would be in the most unstable region. Full article

For laser ablation micropropulsion technology with metal as the target to increase the total impulse, the effective utilization and supply of a working medium is a crucial aspect. In this research, the ablation characteristics and propulsion performance of the typical metal targets, copper and aluminum, ablated via nanosecond laser ablation are analyzed. Due to the low melting point of aluminum, the protrusion characteristics in the remelted area are more prominent. Its surface morphology has characteristics for height extremum and roughness that are higher than those of copper. Affected by the anisotropy of the rough surface, the absorbed energy decreases with increasing roughness. The impulse coupling coefficient of the metal decreases and stabilizes at about 6 μN·W⁻¹. The specific pulse of aluminum obtains a minimum value of 603.6 s at 6000 pulses and improves with increasing pulses. The propulsion parameters of copper alters slightly under various working conditions, with a maximum specific impulse of 685 s. Full article

Aircraft maintenance is defined by the ICAO as the tasks that need to be carried out on an aircraft to ensure its continuing airworthiness. Accidents that result from aircraft maintenance activities are a direct measurable outcome that can be used to broadly assess the effectiveness of maintenance activities. This research seeks to understand the characteristics of aircraft-maintenance-related accidents and how these have changed over time. An exploratory design was utilized, which commenced with a content analysis of 358 accidents from the Aviation Safety Network, followed by a quantitative ex post facto study. The results showed that aircraft-maintenance-related accidents were 1.7 times less fatal compared to all aviation accidents in the database. Fatalities were reduced significantly from the 1990s following major accidents with many fatalities; this was countered by several industry-wide initiatives. However, the number of accidents have continued to grow by one each year. Relative to all accidents, it was found that maintenance contributes to (2.0 ± 0.4)% of all accidents, which increased to (3.8 ± 0.7)% from 1998 to 2019, up from (1.3 ± 0.2)% from 1941 to 1997. However, the rate of maintenance accidents per kilometer flown has decreased exponentially halving every 27.7 years. The results showed that the most common age of an aircraft involved in a maintenance accident was 5 to 15 years, corresponding to the first heavy maintenance period of an aircraft (6 to 12 years). Further results for age showed no correlation to the fatalness of accidents; however, older aircraft were more likely to be written off. Full article

Contrails are responsible for a significant proportion of aviation’s climate impact. This paper uses data from the European Centre for Medium-Range Weather Forecasts to identify the altitudes and latitudes where formed contrails will not persist. This reveals that long-lived contrails may be prevented by flying lower in equatorial regions and higher in non-equatorial regions. Subsequently, it is found that the lighter fuel and reduced seating capacity of hydrogen-powered aircraft lead to a reduced aircraft weight, which increases the optimal operating altitude by about 2 km. In non-equatorial regions, this would lift the aircraft’s cruise point into the region where long-lived contrails do not persist, unlocking hydrogen-powered, low-contrails operation. The baseline aircraft considered is an A320 retrofitted with in-fuselage hydrogen tanks. The impacts of the higher-altitude cruise on fuel burn and the benefits unlocked by optimizing the wing geometry for this altitude are estimated using a drag model based on theory proposed by Cavcar, Lock, and Mason, and verified against existing aircraft. The weight penalty associated with optimizing wing geometry for this altitude is estimated using Torenbeek’s correlation. It is found that thinner wings with higher aspect ratios are particularly suited to this high-altitude operation and are enabled by the relaxation of the requirement to store fuel in the wings. An example aircraft design for the non-equatorial region is provided, which cruises at a 14 km altitude at Mach 0.75 with a less than 1% average probability of generating long-lived contrails when operating at latitudes more than 35° from the equator. Compared to the A320, this concept design is estimated to have a 20% greater cruise lift–drag ratio, due to the 33% thinner wings with a 50% larger aspect ratio, enabling just 5% more energy use per passenger-km, despite fitting 40% fewer seats. Full article

This paper proposes a new range equation for hybrid-electric aircraft. The paper revisits the theory of the range equation for a hybrid-electric aircraft with constant power split published earlier in the literature and proposes a new efficiency-based definition of the degree of hybridization (φ), one which includes the efficiencies of the electric or fuel-powered drivetrain. The paper shows that the efficiencies of the respective drivetrains play a significant role in the range estimation of the hybrid-electric aircraft. The paper makes use of a case study to show the relationship between battery energy density, powertrain efficiency and modification in the definition of the degree of hybridization φ with aircraft range. We show that for every aircraft design, there is a battery energy density threshold, for which the aircraft range becomes independent of the degree of hybridization. Below this threshold, the range decreases with an increase in the degree of hybridization. Conversely, beyond this threshold, the aircraft range increases with the degree of hybridization. Our study finds that the new definition of φ has shifted this threshold significantly upwards compared to earlier publications in the literature. This makes the design of an aircraft with a high degree of hybridization less optimistic. Full article

The temperature of the solar cells on the upper surface of a solar unmanned aerial vehicle (UAV) wing is much higher than the atmospheric temperature during flight. The temperature difference will induce buoyancy-driven Görtler vortices that may influence the aerodynamic characteristics of the wing. In the present study, a hybrid RANS-LES-based approach was used to simulate the flow above a heated flat plate under different flow velocities (from 0.34 m/s to 0.63 m/s) and temperature differences (from 0 K to 60 K), and the influence of Görtler vortices on the flow was analyzed. The existence of buoyancy-driven Görtler vortices would induce velocity normal to the plate, and a negative velocity normal to the plate at the peak position would enhance the momentum exchange within the boundary layer, accelerate the transition, and increase the friction drag coefficient. The drag coefficient with a 60 K temperature difference is almost three times that with a 0 K temperature difference. With an increase in temperature difference or decrease in flow velocity, the intensity of Görtler vortices would increase. A couple of different buoyancy parameters were studied, and a combined parameter based on both the Reynolds number and Grashoff number was proposed as the index parameter of heated plate flow. The flow above a heated flat plate can be divided into three regions by the buoyancy parameter. When the buoyancy parameter is between 100 and 200, the Görtler vortices are stable, and the flow exhibits significant three-dimensional characteristics. Full article

Ammonia dinitramide (ADN)-based liquid monopropellants are considered to be environmentally friendly alternatives to the toxic and carcinogenic hydrazine-based propellants. Hence, Space Solutions Co., Ltd. is developing a 1N ADN-based liquid monopropellant thruster by conducting a combustion performance in different types of reactors. Various parameters, such as preheating temperature and the size of thermal and catalyst beds, were examined. The results showed that the decomposition of the propellant in a Pt-LHA catalyst bed, which was used in the Type-1 reactor, resulted in insufficient combustion at low preheating temperatures. Furthermore, increasing the preheating temperature led to partial reaction of the propellant, but resulted in low combustion efficiency due to disintegration of the catalyst. However, when a thermal bed (STS ball) was used in addition to the catalyst bed (Pt-LHA) in the Type-2 and Type-3 reactors, the combustion efficiency was improved, with a minimal pressure drop of 0.2 bar. It was also confirmed that the catalyst was not damaged even after repeated operations. In conclusion, this study suggests that the propellant needs to vaporize before decomposing on the catalyst bed to achieve optimal combustion efficiency. Full article