Journal Description
Chemosensors
Chemosensors
is an international, scientific, peer-reviewed, open access journal on the science and technology of chemical sensors and related analytical methods and systems, published monthly online by MDPI.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- High Visibility: indexed within Scopus, SCIE (Web of Science), CAPlus / SciFinder, Inspec, and other databases.
- Journal Rank: JCR - Q1 (Instruments & Instrumentation) / CiteScore - Q2 (Analytical Chemistry)
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 16.8 days after submission; acceptance to publication is undertaken in 2.6 days (median values for papers published in this journal in the first half of 2023).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
Impact Factor:
4.2 (2022);
5-Year Impact Factor:
4.2 (2022)
Latest Articles
Fabrication of Electrochemical Sensor for the Detection of Mg(II) Ions Using CeO2 Microcuboids as an Efficient Electrocatalyst
Chemosensors 2023, 11(8), 442; https://doi.org/10.3390/chemosensors11080442 - 07 Aug 2023
Abstract
In human blood serum, the concentration of magnesium ions typically ranges from 0.7 mM to 1.05 mM. However, exceeding the upper limit of 1.05 mM can lead to the condition known as hypermagnesemia. In this regard, a highly sensitive and selective electrochemical sensor
[...] Read more.
In human blood serum, the concentration of magnesium ions typically ranges from 0.7 mM to 1.05 mM. However, exceeding the upper limit of 1.05 mM can lead to the condition known as hypermagnesemia. In this regard, a highly sensitive and selective electrochemical sensor for Mg(II) ion detection was successfully fabricated by immobilizing cerium oxide (CeO2) microcuboids, synthesized via microwave radiation method, onto the surface of glassy carbon electrode (GCE). Cyclic voltammetry studies revealed the exceptional electrocatalytic effect of CeO2 microcuboid-modified GC electrode, particularly in relation to the irreversible reduction signal of Mg(II). The microcuboid-like structure of CeO2 microparticles facilitated enhanced adsorption of Mg(II) ion ( mol cm−2) and electron transfer ( s−1) between the adsorbed Mg(II) ions and GCE. A comprehensive analysis comparing the performance characteristics of amperometry, differential pulse voltammetry, cyclic voltammetry, and square wave voltammetry was conducted. The square wave voltammetry-based Mg(II) sensor exhibited remarkable sensitivity of 2.856 μA mM−1, encompassing a broad linear detection range of 0–3 mM. The detection and quantification limits were impressively low, with values of 19.84 and 66.06 μM, respectively. Remarkably, the developed electrode showed a rapid response time of less than 140 s. Multiple linear regression and partial least squares regression models were employed to establish a mathematical relationship between magnesium ion levels and electrochemical parameters. Notably, the proposed sensor exhibited excellent anti-interferent ability, repeatability, stability, and reproducibility, enabling the fabricated electrode to be used effectively for Mg(II) ion sensing in real-world samples.
Full article
(This article belongs to the Collection Sustainable Metal Oxide Materials for Sensing Applications)
►
Show Figures
Open AccessArticle
Fabrication and Characterization of Hybrid and Tunable [email protected] Flexible Thin Films Used as SERS Substrates
Chemosensors 2023, 11(8), 441; https://doi.org/10.3390/chemosensors11080441 - 07 Aug 2023
Abstract
Flexible substrates have known increased popularity over rigid ones due to their use in surface-enhanced Raman scattering (SERS). They provide irregular surfaces, ideal for in situ sensing. In this context, we report the SERS performance of hybrid [email protected] thin films deposited by magnetron
[...] Read more.
Flexible substrates have known increased popularity over rigid ones due to their use in surface-enhanced Raman scattering (SERS). They provide irregular surfaces, ideal for in situ sensing. In this context, we report the SERS performance of hybrid [email protected] thin films deposited by magnetron sputtering (MS) on flexible, thermoplastic substrates. This physical deposition method is acknowledged for obtaining high-quality and reproducible ZnO films that can be embedded in (bio)sensing devices with various applications. Three types of thermoplastic-based, commercially available substrates with different glass transition temperatures (Tg) were chosen for the variation in flexibility, transparency, and thickness. Zeonor® (Tg = 136 °C, thickness of 188 μm) and two types of Topas (Topas®: Tg = 142 °C, thickness of 176 μm; Topas2: Tg = 78 °C, thickness of 140 μm) thermoplastic sheets are nonpolar and amorphous cyclo-olefin polymer (COP) and cyclo-olefin copolymers (COC), respectively. Their thicknesses and different values of Tg can greatly affect the topographical and roughness properties of films with small thicknesses and, thus, can greatly influence the enhancement of the Raman signal. The ZnO films deposited on top of Zeonor® or Topas® have identical morphological properties, as shown by the scanning electron microscopy (SEM) characterization. Subsequently, by using the MS technique, we tuned the thickness of the deposited silver (Ag) films in the range of 7–30 nm to assess the growth influence on the morphology and the SERS signal amplification of the substrates with and without the ZnO intermediate layer. The SEM analysis showed that the Ag atoms migrated both into the interstitial areas, filling the voids between the ZnO granular structures, and over the latter, forming, in this case, isolated Ag clusters. SERS analysis performed on the ZnO-Ag hybrid films using crystal violet (CV) molecule revealed a limit of detection (LOD) of 10−7 M in the case of 15 nm thick Ag/Zeonor® interlayer films ZnO and relative standard deviation (RSD) below 10%.
Full article
(This article belongs to the Special Issue Recent Developments in Platforms for SERS Applications)
►▼
Show Figures
Figure 1
Open AccessReview
Advances in the Application of Nano-Enzymes in the Electrochemical Detection of Reactive Oxygen Species: A Review
by
and
Chemosensors 2023, 11(8), 440; https://doi.org/10.3390/chemosensors11080440 - 07 Aug 2023
Abstract
Reactive oxygen species (ROS) play an important role in maintaining human health and are recognized as indicators of oxidative stress linked to various conditions such as neurodegenerative and cardiovascular diseases, as well as cancer. Consequently, detecting ROS levels in biological systems is crucial
[...] Read more.
Reactive oxygen species (ROS) play an important role in maintaining human health and are recognized as indicators of oxidative stress linked to various conditions such as neurodegenerative and cardiovascular diseases, as well as cancer. Consequently, detecting ROS levels in biological systems is crucial for biomedical and analytical research. Electrochemical approaches offer promising opportunities for ROS determination due to their exceptional sensitivity, speed, and simplicity of equipment. This review covers studies using advanced electrochemical nanozyme sensors for detecting ROS in biological samples that were published over the last ten years, from 2013 to 2023. Emphasis is placed on the sensor materials and different types of modifiers employed for selective ROS detection. Furthermore, a comprehensive analysis of the sensors’ selectivity was performed.
Full article
(This article belongs to the Special Issue Bionic Recognition and Biosensors: A Theme Issue in Honor of Professor Hong-Yuan Chen)
►▼
Show Figures
Figure 1
Open AccessArticle
WO3-LaFeO3 Nanocomposites for Highly Sensitive Detection of Acetone Vapor at Low Operating Temperatures
Chemosensors 2023, 11(8), 439; https://doi.org/10.3390/chemosensors11080439 - 06 Aug 2023
Abstract
The development of a rapid, highly sensitive, and dependable acetone sensor holds significant importance for human health and safety. To enhance the acetone sensing performance of LaFeO3 nanoparticles for practical applications, commercial n-type WO3 nanoparticles were incorporated as additives. They were
[...] Read more.
The development of a rapid, highly sensitive, and dependable acetone sensor holds significant importance for human health and safety. To enhance the acetone sensing performance of LaFeO3 nanoparticles for practical applications, commercial n-type WO3 nanoparticles were incorporated as additives. They were directly mixed with LaFeO3 nanoparticles produced through a sol-gel method, creating a series of WO3-LFO nanocomposites with varying mass ratios. These nanocomposites were characterized using XRD, SEM, BET, and XPS techniques. Compared to pure LFO nanoparticles, the prepared nanocomposites exhibited larger specific surface areas with enhanced surface reactivity. The introduction of p-n heterojunctions through the mixing process improved the regulation of acetone molecules on internal carrier conduction within nanocomposites. As a result, the nanocomposites demonstrated superior acetone sensing performance in terms of optimal operating temperature, vapor response value, selectivity, and response/recovery speed. Notably, the nanocomposites with a 5wt% addition of WO3 showed the lowest optimal operating temperature (132 °C), the fastest response/recovery speed (28/9 s), and the highest selectivity against ethanol, methanol, and EG. On the other hand, the nanocomposites with a 10wt% addition of WO3 displayed the maximum vapor response value (55.1 to 100 ppm) at an optimal operating temperature of 138 °C, along with relatively good repeatability, stability, and selectivity.
Full article
(This article belongs to the Special Issue Functionalized Metal Oxide for Gas Sensing)
►▼
Show Figures
Figure 1
Open AccessReview
Current Trends in the Use of Semiconducting Materials for Electrochemical Aptasensing
Chemosensors 2023, 11(8), 438; https://doi.org/10.3390/chemosensors11080438 - 06 Aug 2023
Abstract
Aptamers are synthetic single-stranded oligonucleotides that exhibit selective binding properties to specific targets, thereby providing a powerful basis for the development of selective and sensitive (bio)chemical assays. Electrochemical biosensors utilizing aptamers as biological recognition elements, namely aptasensors, are at the forefront of current
[...] Read more.
Aptamers are synthetic single-stranded oligonucleotides that exhibit selective binding properties to specific targets, thereby providing a powerful basis for the development of selective and sensitive (bio)chemical assays. Electrochemical biosensors utilizing aptamers as biological recognition elements, namely aptasensors, are at the forefront of current research. They exploit the combination of the unique properties of aptamers with the advantages of electrochemical detection with the view to fabricate inexpensive and portable analytical platforms for rapid detection in point-of-care (POC) applications or for on-site monitoring. The immobilization of aptamers on suitable substrates is of paramount importance in order to preserve their functionality and optimize the sensors’ sensitivity. This work describes different immobilization strategies for aptamers on the surface of semiconductor-based working electrodes, including metal oxides, conductive polymers, and carbon allotropes. These are presented as platforms with tunable band gaps and various surface morphologies for the preparation of low cost, highly versatile aptasensor devices in analytical chemistry. A survey of the current literature is provided, discussing each analytical method. Future trends are outlined which envisage aptamer-based biosensing using semiconductors.
Full article
(This article belongs to the Special Issue State-of-the-Art (Bio)chemical Sensors—Celebrating 10th Anniversary)
►▼
Show Figures
Figure 1
Open AccessCommunication
An Upgraded Protocol for the Silanisation of the Solid Phase for the Synthesis of Molecularly Imprinted Polymers
by
, , , , , , , , , and
Chemosensors 2023, 11(8), 437; https://doi.org/10.3390/chemosensors11080437 - 05 Aug 2023
Abstract
The introduction of solid-phase imprinting has had a significant impact in the molecular imprinting field, mainly due to its advantage of orienting the template immobilisation, affinity separation of nanoMIPs and faster production time. To date, more than 600 documents on Google Scholar involve
[...] Read more.
The introduction of solid-phase imprinting has had a significant impact in the molecular imprinting field, mainly due to its advantage of orienting the template immobilisation, affinity separation of nanoMIPs and faster production time. To date, more than 600 documents on Google Scholar involve solid-phase synthesis, mostly relying on silanes mediating template immobilisation on the solid phase. Organosilanes are the most explored functionalisation compounds due to their straightforward use and ability to promote the binding of organic molecules to inorganic substrates. However, they also suffer from well-known issues, such as lack of control in the layer’s deposition and poor stability in water. Since the first introduction of solid-phase imprinting, few efforts have been made to overcome these limitations. The work presented in this research focuses on optimising the silane stability on glass beads (GBs) and iron oxide nanoparticles (IO-NPs), to subsequently function as solid phases for imprinting. The performance of three different aminosilanes were investigated; N-(6-aminohexyl) aminomethyltriethoxy silane (AHAMTES), 3-Aminopropyltriethoxysilane (APTES), and N-(2-aminoethyl)-3-aminopropyltriethoxysilane (AEAPTES), as well as studying the effect of dipodal silane bis(triethoxysilyl)ethane (BTSE). A stable solid phase was consequently achieved with 3% v/v AEAPTES and 2.4% BTSE, providing an upgraded protocol from Canfarotta et al. for the silanisation of the solid phase for molecular imprinting purposes.
Full article
(This article belongs to the Special Issue Advances in the Manufacture of Sensors Based on Molecularly Imprinted Polymers)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Layer-by-Layer Film Based on Sn3O4 Nanobelts as Sensing Units to Detect Heavy Metals Using a Capacitive Field-Effect Sensor Platform
by
, , , and
Chemosensors 2023, 11(8), 436; https://doi.org/10.3390/chemosensors11080436 - 05 Aug 2023
Abstract
Lead and nickel, as heavy metals, are still used in industrial processes, and are classified as “environmental health hazards” due to their toxicity and polluting potential. The detection of heavy metals can prevent environmental pollution at toxic levels that are critical to human
[...] Read more.
Lead and nickel, as heavy metals, are still used in industrial processes, and are classified as “environmental health hazards” due to their toxicity and polluting potential. The detection of heavy metals can prevent environmental pollution at toxic levels that are critical to human health. In this sense, the electrolyte–insulator–semiconductor (EIS) field-effect sensor is an attractive sensing platform concerning the fabrication of reusable and robust sensors to detect such substances. This study is aimed to fabricate a sensing unit on an EIS device based on Sn3O4 nanobelts embedded in a polyelectrolyte matrix of polyvinylpyrrolidone (PVP) and polyacrylic acid (PAA) using the layer-by-layer (LbL) technique. The EIS-Sn3O4 sensor exhibited enhanced electrochemical performance for detecting Pb2+ and Ni2+ ions, revealing a higher affinity for Pb2+ ions, with sensitivities of ca. 25.8 mV/decade and 2.4 mV/decade, respectively. Such results indicate that Sn3O4 nanobelts can contemplate a feasible proof-of-concept capacitive field-effect sensor for heavy metal detection, envisaging other future studies focusing on environmental monitoring.
Full article
(This article belongs to the Special Issue The Application of Electrochemical Sensors or Biosensors Based on Nanomaterials)
►▼
Show Figures
Graphical abstract
Open AccessArticle
NaBH4-Mediated Co-Reduction Synthesis of Glutathione Stabilized Gold/Silver Nanoclusters for Detection of Magnesium Ions
Chemosensors 2023, 11(8), 435; https://doi.org/10.3390/chemosensors11080435 - 05 Aug 2023
Abstract
The content of magnesium ions (Mg2+) in drinking water is relatively high and the excessive Mg2+ ingestion may lead to pathological lesions in the human body system. At present, the detection of Mg2+ still relies on costly devices or/and
[...] Read more.
The content of magnesium ions (Mg2+) in drinking water is relatively high and the excessive Mg2+ ingestion may lead to pathological lesions in the human body system. At present, the detection of Mg2+ still relies on costly devices or/and complex organic fluorescence probes. To solve this problem, this work proposed a NaBH4-mediated co-reduction strategy for the synthesis of glutathione-stabilized bimetallic AuAg nanoclusters ([email protected] NCs) with performance recognition to Mg2+. The preparation of [email protected] NCs was simple and rapid and could be performed at mild conditions. The reaction parameters and sampling orders were optimized to understand the formation mechanism of [email protected] NCs. The [email protected] NCs exhibited a sensitive “light on” fluorescence response to Mg2+ due to the re-molding of the interfacial physicochemical environment following the Mg2+ coordination, which affected the surface charge transfer process, and thus led to a novel method for fluorescence detection of Mg2+ with admirable selectivity for Mg2+. The proposed method showed a detection limit of 0.2 μM, and its practical utility for the detection of Mg2+ in a real sample of purified drinking water was also demonstrated, confirming its practicability in monitoring the Mg2+ concentration in drinking water.
Full article
(This article belongs to the Special Issue Bionic Recognition and Biosensors: A Theme Issue in Honor of Professor Hong-Yuan Chen)
►▼
Show Figures
Figure 1
Open AccessArticle
Ammonia Mediated Silver Nanoparticles Based Detection of Bisphenol A, an Endocrine Disruptor, in Water Samples after Vortex-Assisted Liquid–Liquid Microextraction
by
, , , , , , and
Chemosensors 2023, 11(8), 434; https://doi.org/10.3390/chemosensors11080434 - 05 Aug 2023
Abstract
Bisphenol A (BPA), an alkylphenolic compound, is one of the most polluting and hazardous organic chemicals. Its routine detection is, however, still rather expensive due to high-cost equipment. In this context, we applied the effect caused by BPA to the optical properties of
[...] Read more.
Bisphenol A (BPA), an alkylphenolic compound, is one of the most polluting and hazardous organic chemicals. Its routine detection is, however, still rather expensive due to high-cost equipment. In this context, we applied the effect caused by BPA to the optical properties of surfactant-stabilized silver nanoparticles further modified with the use of ammonia (AgNP-NH3) to develop a simple and quantitative approach for BPA determination. The experimental conditions of the AgNP-NH3 probe were adjusted to establish a stable and sensitive response toward BPA in aqueous media. The use of probe dispersion measured at a wavelength of 403 nm enabled a limit of detection of 2.0 nmol L−1 (0.5 ng mL−1), with a linear response as a function of a concentration of BPA ranging from 10 to 120 nmol L−1 (from 2.2 to 27 ng mL−1). The use of vortex-assisted liquid–liquid microextraction ensured the application of selective determination to real tap and stream water samples, with recoveries ranging from 85.0 to 111%. The protocol developed herein is simple, sensitive, and selective, does not require the use of toxic labeling agents, and can be easily adapted for the routine analysis of BPA in different real samples.
Full article
(This article belongs to the Section Analytical Methods, Instrumentation and Miniaturization)
►▼
Show Figures
Graphical abstract
Open AccessReview
Near-Infrared-II Fluorophores for In Vivo Multichannel Biosensing
Chemosensors 2023, 11(8), 433; https://doi.org/10.3390/chemosensors11080433 - 04 Aug 2023
Abstract
The pathological process involves a range of intrinsic biochemical markers. The detection of multiple biological parameters is imperative for providing precise diagnostic information on diseases. In vivo multichannel fluorescence biosensing facilitates the acquisition of biochemical information at different levels, such as tissue, cellular,
[...] Read more.
The pathological process involves a range of intrinsic biochemical markers. The detection of multiple biological parameters is imperative for providing precise diagnostic information on diseases. In vivo multichannel fluorescence biosensing facilitates the acquisition of biochemical information at different levels, such as tissue, cellular, and molecular, with rapid feedback, high sensitivity, and high spatiotemporal resolution. Notably, fluorescence imaging in the near-infrared-II (NIR-II) window (950–1700 nm) promises deeper optical penetration depth and diminished interferential autofluorescence compared with imaging in the visible (400–700 nm) and near-infrared-I (NIR-I, 700–950 nm) regions, making it a promising option for in vivo multichannel biosensing toward clinical practice. Furthermore, the use of advanced NIR-II fluorophores supports the development of biosensing with spectra-domain, lifetime-domain, and fluorescence-lifetime modes. This review summarizes the versatile designs and functions of NIR-II fluorophores for in vivo multichannel biosensing in various scenarios, including biological process monitoring, cellular tracking, and pathological analysis. Additionally, the review briefly discusses desirable traits required for the clinical translation of NIR-II fluorophores such as safety, long-wavelength emission, and clear components.
Full article
(This article belongs to the Special Issue Bionic Recognition and Biosensors: A Theme Issue in Honor of Professor Hong-Yuan Chen)
►▼
Show Figures
Figure 1
Open AccessReview
Recent Advances in Electrochemiluminescence Emitters for Biosensing and Imaging of Protein Biomarkers
by
and
Chemosensors 2023, 11(8), 432; https://doi.org/10.3390/chemosensors11080432 - 04 Aug 2023
Abstract
Electrochemiluminescence (ECL) is a light-emitting process triggered by the high energy redox between electrochemically oxidized and reduced luminophores or some coreactive intermediate radicals, representing a blooming hot topic over decades with a wide variety of bioanalytical applications. Due to the superb sensitivity, ultralow
[...] Read more.
Electrochemiluminescence (ECL) is a light-emitting process triggered by the high energy redox between electrochemically oxidized and reduced luminophores or some coreactive intermediate radicals, representing a blooming hot topic over decades with a wide variety of bioanalytical applications. Due to the superb sensitivity, ultralow background noise, specificity, ease of integration, and real-time and in situ analysis, ECL has been developed as a convenient and versatile technique for immunodiagnostics, nucleic acid analysis, and bioimaging. Discovering highly-efficient ECL emitters has been a promising subject that will benefit the development of sensitive bioanalytical methods with prominent potential prospects. To date, the interdisciplinary integrations of electrochemistry, spectroscopy, and nanoscience have brought up the continuous emergences of novel nanomaterials which can be flexibly conjugated with specific bio-recognition elements as functional ECL emitters for bioassays. Therefore, a critical overview of recent advances in developing highly-efficient ECL emitters for ultrasensitive detection of protein biomarkers is presented in this review, where six kinds of the most promising ECL nanomaterials for biosensing and imaging of various disease-related protein biomarkers are separately introduced with references to representative works. Finally, this review discusses the ongoing opportunities and challenges of ECL emitters in developing advanced bioassays for single-molecule analysis and spatiotemporally resolved imaging of protein biomarkers with future perspectives.
Full article
(This article belongs to the Special Issue Bionic Recognition and Biosensors: A Theme Issue in Honor of Professor Hong-Yuan Chen)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Ratio-Metric Fluorescence/Colorimetric and Smartphone-Assisted Visualization for the Detection of Dopamine Based on Cu-MOF with Catecholase-like Activity
Chemosensors 2023, 11(8), 431; https://doi.org/10.3390/chemosensors11080431 - 03 Aug 2023
Abstract
As the most abundant catecholamine neurotransmitter in the brain, dopamine plays an important role in the normal physiological process, and its level in urine also changes during human pathological processes. In clinic, the detection of dopamine in urine is a potential marker for
[...] Read more.
As the most abundant catecholamine neurotransmitter in the brain, dopamine plays an important role in the normal physiological process, and its level in urine also changes during human pathological processes. In clinic, the detection of dopamine in urine is a potential marker for the diagnosis and the treatment of endocrine-related diseases. In this work, a copper metal organic framework with catecholase-like activity was prepared via the precipitation of Cu2+ and imidazole, simulating the N-Cu coordination environment in the active site of catecholase. Cu-MOF (the copper–metal organic framework) can catalyze the oxidation of DA (dopamine) to dopaquinone using O2 in the air. The oxidation product can further react with 1,3-dihydroxynaphthalene to produce a fluorophore product. Based on the above reaction, a multimodal sensing platform with three signal outputs, including ratio-metric fluorescence, absorbance and digital information extracted from smartphone images for simple and sensitive determination of DA, was proposed, with detection limits of 0.0679, 0.3206, and 0.3718 μM, respectively. This multimodal sensing platform was able to detect DA in body fluid in a self-correcting way, as demonstrated by the successful determination of DA in normal human urine samples, and samples with a high level of interference.
Full article
(This article belongs to the Special Issue Nanoparticles in Chemical and Biological Sensing)
►▼
Show Figures
Figure 1
Open AccessReview
Optical Immunosensors for Bacteria Detection in Food Matrices
Chemosensors 2023, 11(8), 430; https://doi.org/10.3390/chemosensors11080430 - 03 Aug 2023
Abstract
Optical immunosensors are one of the most popular categories of immunosensors with applications in many fields including diagnostics and environmental and food analysis. The latter field is of particular interest not only for scientists but also for regulatory authorities and the public since
[...] Read more.
Optical immunosensors are one of the most popular categories of immunosensors with applications in many fields including diagnostics and environmental and food analysis. The latter field is of particular interest not only for scientists but also for regulatory authorities and the public since food is essential for life but can also be the source of many health problems. In this context, the current review aims to provide an overview of the different types of optical immunosensors focusing on their application for the determination of pathogenic bacteria in food samples. The optical immunosensors discussed include sensors based on evanescent wave transduction principles including surface plasmon resonance (SPR), fiber-optic-, interferometric-, grating-coupler-, and ring-resonator-based sensors, as well as reflectometric, photoluminescence, and immunosensors based on surface-enhanced Raman scattering (SERS). Thus, after a short description of each transduction technique, its implementation for the immunochemical determination of bacteria is discussed. Finally, a short commentary about the future trends in optical immunosensors for food safety applications is provided.
Full article
(This article belongs to the Special Issue Advances in Bacteria Biosensors)
►▼
Show Figures
Graphical abstract
Open AccessReview
MOF-Based Materials for Glucose Detection
by
, , , , , , and
Chemosensors 2023, 11(8), 429; https://doi.org/10.3390/chemosensors11080429 - 02 Aug 2023
Abstract
Metal–organic frameworks (MOFs), constructed by coordination between metal-containing nodes and organic linkers, are widely used in various fields due to the advantages of tunable pores, diverse functional sites, stable structure, and multi-functionality. It should be noted that MOF-based materials play a major role
[...] Read more.
Metal–organic frameworks (MOFs), constructed by coordination between metal-containing nodes and organic linkers, are widely used in various fields due to the advantages of tunable pores, diverse functional sites, stable structure, and multi-functionality. It should be noted that MOF-based materials play a major role in glucose detection, serving as a signal transducer or functional substrate for embedding nanoparticles/enzymes. Diabetes is one of the most common and fast-growing diseases worldwide, whose main clinical manifestation is high blood sugar levels. Therefore, accurate, sensitive, and point-of-care glucose detection is necessary. This review orderly introduces general synthetic strategies of MOF-based materials (pristine MOF, nanoparticles, or enzymes-modified MOF and MOF-derived materials) and detection methods (electrochemical and optical methods) for glucose detection. Then, the review refers to the novel MOF-based glucose detection devices (flexible wearable devices and microfluidic chips), which enable non-invasive continuous glucose monitoring or low-cost microscale detection. On the basis of describing the development of glucose sensors based on MOF materials in the past five years, the review presents merits, demerits, and possible improvements of various detection methods.
Full article
(This article belongs to the Special Issue Bionic Recognition and Biosensors: A Theme Issue in Honor of Professor Hong-Yuan Chen)
►▼
Show Figures
Figure 1
Open AccessArticle
Development of a New Hydrogen Sulfide Fluorescent Probe Based on Coumarin–Chalcone Fluorescence Platform and Its Imaging Application
Chemosensors 2023, 11(8), 428; https://doi.org/10.3390/chemosensors11080428 - 02 Aug 2023
Abstract
Hydrogen sulfide (H2S), as one of the critical gaseous signaling molecules, has important physiological functions in the human body, and abnormal levels of hydrogen sulfide are closely related to tumors, Parkinson’s disease, Alzheimer’s disease, and other diseases. In order to enable
[...] Read more.
Hydrogen sulfide (H2S), as one of the critical gaseous signaling molecules, has important physiological functions in the human body, and abnormal levels of hydrogen sulfide are closely related to tumors, Parkinson’s disease, Alzheimer’s disease, and other diseases. In order to enable the detection of H2S in the physiological environment, herein, a new H2S fluorescence probe, named C-HS, based on a coumarin–chalcone fluorescence platform was developed. The fluorescence probe provides specific recognition of H2S within a wide pH detection range (5.5–8.5), a rapid recognition response (within 10 min) for H2S molecules, and a high selectivity for competing species. The probe C-HS possesses low cytotoxicity and is used to achieve the detection of exogenous/ endogenous H2S in living cells, indicating that the constructed probe C-HS has the ability to track changes in intracellular H2S levels. Therefore, probe C-HS could be a potential tool for the early diagnosis of H2S-related diseases.
Full article
(This article belongs to the Special Issue Nanoprobes for Biosensing and Bioimaging)
►▼
Show Figures
Figure 1
Open AccessReview
A Review on Non-Noble Metal Substrates for Surface-Enhanced Raman Scattering Detection
Chemosensors 2023, 11(8), 427; https://doi.org/10.3390/chemosensors11080427 - 01 Aug 2023
Abstract
Surface-enhanced Raman scattering (SERS), a powerful spectroscopic technique owing to its abundant vibrational fingerprints, has been widely employed for the assay of analytes. It is generally considered that one of the critical factors determining the SERS performance is the property of the substrate
[...] Read more.
Surface-enhanced Raman scattering (SERS), a powerful spectroscopic technique owing to its abundant vibrational fingerprints, has been widely employed for the assay of analytes. It is generally considered that one of the critical factors determining the SERS performance is the property of the substrate materials. Apart from noble metal substrates, non-noble metal nanostructured materials, as emerging new substrates, have been extensively studied for SERS research by virtue of their superior biocompatibility, good chemical stability, outstanding selectivity, and unique physicochemical properties such as adjustable band structure and carrier concentration. Herein, in this review, we summarized the research on the analytical application of non-noble metal SERS substrates from three aspects. Firstly, we started with an introduction to the possible enhancement mechanism of non-noble metal substrates. Then, as a guideline for substrates design, several main types of materials, including carbon nanomaterials, transition metal dichalcogenides (TMDs), metal oxides, metal-organic frameworks (MOFs), transition metal carbides and nitrides (MXenes), and conjugated polymers were discussed. Finally, we especially emphasized their analytical application, such as the detection of pollutants and biomarkers. Moreover, the challenges and attractive research prospects of non-noble metal SERS substrates in practical application were proposed. This work may arouse more awareness of the practical application of the non-noble metal material-based SERS substrates, especially for bioanalysis.
Full article
(This article belongs to the Special Issue Bionic Recognition and Biosensors: A Theme Issue in Honor of Professor Hong-Yuan Chen)
►▼
Show Figures
Figure 1
Open AccessArticle
Fluorophores-Assisted Excitation Emission Matrix Fluorescence Method for the Origin Traceability of Lily
Chemosensors 2023, 11(8), 426; https://doi.org/10.3390/chemosensors11080426 - 01 Aug 2023
Abstract
In this work, a fluorophores-assisted excitation/emission matrix (EEM) fluorescence method was proposed to trace the origin of lily in the Chinese market. There are few active components in lilies that have fluorescent signals, and too few characteristic variables may lead to unsatisfactory accuracy
[...] Read more.
In this work, a fluorophores-assisted excitation/emission matrix (EEM) fluorescence method was proposed to trace the origin of lily in the Chinese market. There are few active components in lilies that have fluorescent signals, and too few characteristic variables may lead to unsatisfactory accuracy in the subsequent classification. Therefore, three fluorophores, 2-Aminoethyl diphenylborinate (DPBA), o-Phthalaldehyde (OPA) and Rhodamine B (RB), were used to enrich the information of the fluorescent fingerprint of lily, which can improve the classification accuracy. The lily samples were characterized by using EEM fluorescence coupled with the alternating trilinear decomposition (ATLD) algorithm, which was able to extract information of various fluorophores in lily samples. Two chemical pattern recognition methods, principal component analysis-linear discriminant analysis (PCA-LDA) and partial least squares-discrimination analysis (PLS-DA), were used to model and trace the origin of different lilies. When the fluorophores were added, the accuracy of the test set and prediction set obtained by the classification model increased from 71.4% to 92.9% and 66.7% to 100%, respectively. The proposed method combined fluorophores-assisted EEM fluorescence with multi-way chemometric methods to extract comprehensive information on the samples, which provided a potential method for the origin traceability of traditional Chinese medicine.
Full article
(This article belongs to the Special Issue Bionic Recognition and Biosensors: A Theme Issue in Honor of Professor Hong-Yuan Chen)
►▼
Show Figures
Figure 1
Open AccessCommunication
Determination of Extra- and Intra-Cellular pH Using Characteristic Absorption of Water by Near-Infrared Spectroscopy
Chemosensors 2023, 11(8), 425; https://doi.org/10.3390/chemosensors11080425 - 01 Aug 2023
Abstract
Accurate determination of extra-cellular pH (pHe) and intra-cellular pH (pHi) is important to cancer diagnosis and treatment because tumor cells exhibit a lower pHe and a slightly higher pHi than normal cells. In this work, the characteristic absorption of water in the near-infrared
[...] Read more.
Accurate determination of extra-cellular pH (pHe) and intra-cellular pH (pHi) is important to cancer diagnosis and treatment because tumor cells exhibit a lower pHe and a slightly higher pHi than normal cells. In this work, the characteristic absorption of water in the near-infrared (NIR) region was utilized for the determination of pHe and pHi. Dulbecco’s modified eagle medium (DMEM) and bis (2-ethylhexyl) succinate sodium sulfonate reverse micelles (RM) were employed to simulate the extra- and intra-cellular fluids, respectively. Continuous wavelet transform (CWT) was used to enhance the resolution of the spectra. Quantitative models for pHe and pHi were established using partial least squares (PLS) regression, producing relative errors of validation samples in a range of −0.74–2.07% and −1.40–0.83%, respectively. Variable selection was performed, and the correspondence between the selected wavenumbers and water structures was obtained. Therefore, water with different hydrogen bonds may serve as a good probe to sense pH within biological systems.
Full article
(This article belongs to the Special Issue Bionic Recognition and Biosensors: A Theme Issue in Honor of Professor Hong-Yuan Chen)
►▼
Show Figures
Figure 1
Open AccessReview
Electrochemical Biosensing Methods for Detecting Epigenetic Modifications
Chemosensors 2023, 11(8), 424; https://doi.org/10.3390/chemosensors11080424 - 01 Aug 2023
Abstract
Epigenetic modifications are closely related to diseases and physiological health, mainly including DNA methylation, RNA methylation, histone acetylation, and noncoding RNA. Recently, a large amount of research has been conducted on the detection of epigenetic modifications. Electrochemical biosensors, with their low cost, high
[...] Read more.
Epigenetic modifications are closely related to diseases and physiological health, mainly including DNA methylation, RNA methylation, histone acetylation, and noncoding RNA. Recently, a large amount of research has been conducted on the detection of epigenetic modifications. Electrochemical biosensors, with their low cost, high sensitivity, high compatibility, and simple operation, have been widely used in the detection of epigenetic biomarkers. This review discusses the detection of epigenetic biomarkers using different electrochemical sensing methods. Here we discuss various aspects, including free labels, signal labeling, signal amplification, nano-based electrodes, and the combined use of other methods. By summarizing the existing electrochemical detection methods for epigenetic modifications, this review also proposes future development trends and challenges for electrochemical biosensors in this field.
Full article
(This article belongs to the Special Issue Bionic Recognition and Biosensors: A Theme Issue in Honor of Professor Hong-Yuan Chen)
►▼
Show Figures
Figure 1
Open AccessArticle
Enhancing Polyantimonic-Based Materials’ Moisture Response with Binder Content Tuning
Chemosensors 2023, 11(8), 423; https://doi.org/10.3390/chemosensors11080423 - 30 Jul 2023
Abstract
Humidity sensors are of huge importance in diverse domains. Several types of materials present a moisture-sensing capacity; however, frequently, their electrical response does not display time stability. Due to its high thermal stability, high ionic conductivity, and different conduction mechanism contributing to its
[...] Read more.
Humidity sensors are of huge importance in diverse domains. Several types of materials present a moisture-sensing capacity; however, frequently, their electrical response does not display time stability. Due to its high thermal stability, high ionic conductivity, and different conduction mechanism contributing to its overall conductivity, polyantimonic acid (PAA) is seen as a promising material for humidity-sensing devices. In the present work, crystalline PAA was obtained via a simple and safe hydrolysis technique using SbCl3 as a precursor. Bulky sensor samples were produced using different amounts of polyvinyl alcohol (10–20 wt.% PVA) as a binder. The obtained PAA solid sensors were tested at room temperature (RT) in order to evaluate their moisture detection/measuring ability in the relative humidity range 0–100%; the evaluation was carried out with electrical impedance spectroscopy. The sample’s structure and morphology were studied using diverse experimental techniques (porosimetry, scanning electron microscopy, X-ray diffraction analysis, and thermogravimetry analysis, etc.). The sensors’ electrical response was in line with the found structural and morphological features. The slope of the resistance variation with an RH percentage concentration between 1 kΩ and 1.5 kΩ was noted for all sensors (showing no changes with time) in the interval between 30 and 100% RH. A good repeatability and reproducibility of the evaluated sensors’ electrical response was observed: the ones that displayed a higher sensitivity were the ones with a high PVA binder content, higher than previously published results for PAA, as well as a very good time stability along the time and low hysteresis.
Full article
(This article belongs to the Section Materials for Chemical Sensing)
►▼
Show Figures
Figure 1
Journal Menu
► ▼ Journal Menu-
- Chemosensors Home
- Aims & Scope
- Editorial Board
- Reviewer Board
- Topical Advisory Panel
- Instructions for Authors
- Special Issues
- Topics
- Sections & Collections
- Article Processing Charge
- Indexing & Archiving
- Editor’s Choice Articles
- Most Cited & Viewed
- Journal Statistics
- Journal History
- Journal Awards
- Conferences
- Editorial Office
- 10th Anniversary of Chemosensors
Journal Browser
► ▼ Journal BrowserHighly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Topic in
Applied Nano, Biosensors, Chemosensors, Materials, Sensors
Nanomaterial Based Gas Sensors for Environmental Air Pollutant Detection
Topic Editors: Tesfalem Welearegay, Radu IonescuDeadline: 30 September 2023
Conferences
Special Issues
Special Issue in
Chemosensors
Room Temperature Detection and Sensing Technologies
Guest Editors: Maria Josè Lo Faro, Salvo MirabellaDeadline: 20 August 2023
Special Issue in
Chemosensors
Molecularly Imprinted Plasmonic Sensor
Guest Editors: Verónica Montes García, Alexander Castro GrijalbaDeadline: 31 August 2023
Special Issue in
Chemosensors
Photoluminescence, Bioluminescence and Chemiluminescence (Bio)sensors and Probes
Guest Editors: Ana Soldado, Rosana Badía, Alfonso Fernández-GonzálezDeadline: 15 September 2023
Special Issue in
Chemosensors
Nanowire-Based Sensors
Guest Editors: Simas Rackauskas, Agne SulciuteDeadline: 30 September 2023
Topical Collections
Topical Collection in
Chemosensors
Women Special Issue in Chemosensors and Analytical Chemistry
Collection Editors: Teresa Corrales, Nicole Jaffrezic-Renault, Eleonora Alfinito
Topical Collection in
Chemosensors
Recent Trend in Chromatography for Pharmaceutical Analysis
Collection Editors: Cláudia Maria Rosa Ribeiro, Maria Elizabeth Tiritan
Topical Collection in
Chemosensors
Optical Chemosensors and Biosensors
Collection Editor: Ambra Giannetti
Topical Collection in
Chemosensors
Sustainable Metal Oxide Materials for Sensing Applications
Collection Editors: Ana Rovisco, Elisabetta Comini